Proface APL3000B - Node Box PC - Manual (Page 37)

PL3000 Series Reference Manual
2-6
Multi Sector Transfers
Specifies the number of sectors per block, which are transferred to the memory. When [Type] is [None] or
[Auto], the selection is disabled.
[Disabled] Transfers by sector.
[2 Sectors] Transfers 2 sectors at a time.
[4 Sectors] Transfers 4 sectors at a time.
[8 Sectors] Transfers 8 sectors at a time.
[16 Sectors] Transfers 16 sectors at a time.
LBA Mode Control
Enables or disables the Logical Block Address (LBA) instead of the Cylinders, Headers, and Sectors. When
[Type] is [None] or [Auto], the selection is disabled.
[Disabled] Does not use LBA mode.
[Enabled] Uses LBA mode.
32 Bit I/O
Specifies an enabled/disabled state for the 32 bit transferring between CPU and IDE controller.
When the [Type] is [None], nothing is displayed.
[Enabled] Uses 32 bit transfer.
[Disabled] Does not use 32 bit transfer.
Transfer Mode
Specifies a method of transferring data. When the [type] is [None], nothing is displayed. When [Type] is
[None] or [Auto], the selection is disabled.
[Standard] Specifies Transfer Mode to PIO Mode 0.
[Fast PIO 0 to Fast PIO 4] Specifies Transfer Mode to Fast PIO Mode 1 - Mode 4.
[FPIO 3/DMA 1] Uses Fast PIO Mode 3 or DMA Mode 1.
[FPIO 4/DMA 2] Uses Fast PIO Mode 4 or DMA Mode 2.
Ultra DMA Mode
Specifies a Ultra DMA mode for the Hard drive. When [Type] is [None] or [Auto], the selection is disabled.
[Disabled] Does not use Ultra DMA mode.
[Mode 0 to Mode 5] Specifies the Ultra DMA mode.