Proface APL3000B - Node Box PC - Manual (Page 59)

PL3000 Series Reference Manual
2-28
2.2.4 Boot
Specifies an order for boot-up devices. The boot-up devices are specified in the Boot priority order list and are
searched for from the top of the list in sequence. By using the [+] or [-] keys, change its order. To change the
device to be booted up, use the [x] key to move the device from the Boot priority order list to the Excluded
from boot order list and vice versa.
Boot priority order
Specifies the order of the boot-up devices. The factory default settings are as follows:
1: STOR DEV : Storage Device
2: SOFT MIRROR : Soft Mirror Boot
3: STOR DEV : Storage Device
4: STOR DEV : Storage Device
5: IDE CD/DVD : IDE CD/DVD Drive
6: USB CD/DVD : USB CD/DVD Drive
7: USB FDC : USB Floppy Disk Drive
8: USB STOR : USB Storage Device
Excluded from boot order
: STOR DEV : Storage Device
: STOR DEV : Storage Device
: PXE ROM: IBA GE Slot 0200 v1260: LAN1 PXE Boot ROM
: PXE ROM: IBA FE Slot 0840 v4121 : LAN2 PXE Boot ROM
: PCI : Other PCI device
• When a new hard disk or commercial USB memory which does not require boot-up is connected
and such a device is given high priority in the Boot priority order list, the system may not boot up
properly. Be sure to check the order of the devices in the Boot priority order list after you con-
nect a new device.