Proface APL3000B - Node Box PC - Manual (Page 10)

9
Connecting a Digital FP as a multi-display to the PL3000 series
You can use a DVI-D/RGB splitter cable (type: CA7-CBLCVDVI-D/RGB-01) to connect two monitors. By
doing so, you can display the same screen or different information on both monitors. For each PL3000 series
type, when using a Digital DP display as a multi-display, the connection procedure depends on the type of
monitor.
„ Selecting a display function
Configure the Digital FP as a multi-display monitor and the display functions to be shown.
(1) Open [Control Panel] from the Start menu.
(2) Open [Display]. (In Windows XP, this is in the [Appearance and Themes] category.)
(3) In the Settings tab, click [Advanced].
• With the PL3000 series box type, when connecting a Digital FP as a monitor, you may need to
configure the FP dip switches depending on the display signal of the connected device and the
touch panel data communication cable. For details about configuring dip switches, refer to the
FP instruction manual.