Proface APL3000B - Node Box PC - Manual (Page 52)

Chapter 2 System Setup
2-21
„ PCI Configuration
Specifies the PCI IRQ parameters. Point the cursor to the [PCI Configuration] on the [Integrated Device
Configration] screen and press the [Enter] Key, so that the following screen will be displayed.
PCI/PNP ISA IRQ Resource Exclusion
Point the cursor to [PCI/PNP ISA IRQ Resource Exclusion] and press the [Enter] Key to go to the PCI/PNP
ISA IRQ screen.
PCI IRQ line 1 to PCI IRQ line 8
Specifies the interrupt No. of the PCI.
[Disabled] The PCI is not used.
[Auto Select] The interrupt No. is allocated automatically.
[3] to [15] Each preset interrupt No. is used.