Proface LT3300 - 5.7 All-in-One HMI" - Manual (Page 65)

LT3000 Series Hardware Manual
3-4
3.1.2 Connection to Pulse Motor Amplifier (Clock Up/Down System)
The following circuit diagrams show examples of connections between the LT and a pulse motor amplifier (in
the case where the transistor can be connected to the amplifier).
„ Output Sink Type
• The circuit of the pulse motor amplifier is illustrated by the DC24V clock up/down sys-
tem. However, the withstand voltage and the operating current of the coupler, which
receives pulse signals, vary by manufacturer. Please contact the amplifier manufacturer
before using.
• The output terminals for LT pulses are the ones that have the signal names OUT0, OUT1,
OUT2, and OUT3. For details of the setting, please refer to the GP-Pro EX
Reference Manual.
• Output signals for switching do not have to be connected to terminals that accommodate
high-speed output, and can be connected to general-purpose terminals (LT-3200 series:
OUT 4 and OUT5, LT-3300 series: OUT4 through OUT15).
Internal
Circuit
Internal
Circuit
Fuse
2.5A
DC 24V
External
Power
supply
+24V
+ -
DIO
LT Amplifier (DC24V-capable)
Lead wires
from motor
0V
OUT0
OUT3
CW/CCW A
CW/CCW B
Switching A
Switching B
SEE