IEI Integration NOVA-PV-D4251_D5251 v1.01 - Manual (Page 94)

NOVA-PV-D5251/D4251 5.25" SBC
Page 80
PS/2 connectors. The keyboard PS/2 connector and mouse PS/2 connector are
both marked. Please make sure the keyboard and mouse are connected to the
correct PS/2 connector. Step 0:
4.7.3 LVDS LCD Installation
The NOVA-PV-D5251/D4251 can be connected to a TFT LCD screen through the LVDS
crimp connector on the board. To connect a TFT LCD to the NOVA-PV-D5251/D4251,
please follow the steps below.
Step 1: Locate the connector. The location of the LVDS connector is shown in
Chapter 3.
Step 2: Insert the cable connector. Insert the connector from the LVDS PCB driving
board to the LVDS connector as shown in Figure 4-14. When connecting the
connectors make sure the pins are properly aligned.
WARNING:
The diagram below is merely for illustration. The configuration and
connection of the cables from the TFT LCD screen being installed may
be different. Please refer to the installation manual that came with the
TFT LCD screen.