IEI Integration NOVA-PV-D4251_D5251 v1.01 - Manual (Page 121)

NOVA-PV-D5251/D4251 5.25" SBC
Page 107
5.3.6.1.7 Parallel Port Configuration
Î Parallel Port [Enabled]
Use the Parallel Port option to enable or disable the parallel port.
Î
Disabled Disable the parallel port
Î
Enabled D EFAULT Enable the parallel port
Î Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.
Î
Auto D EFAULT The parallel port IO port address and interrupt
address are automatically detected.
Î
IO=378h;
IRQ=7
Parallel Port I/O port address is 378h and the
interrupt address is IRQ7
Î
IO=278h;
IRQ=7
Parallel Port I/O port address is 278h and the
interrupt address is IRQ7
Î
IO=3BCh;
IRQ=7
Parallel Port I/O port address is 3BCh and the
interrupt address is IRQ7
Î Device Mode [Standard and Bi-direction (SPP) mode]
Use the Device Mode option to select the mode the parallel port operates in.
ƒ Printer Mode
ƒ Standard and Bi-direction (SPP) Mode
ƒ EPP-1.9 and SPP Mode
ƒ EPP 1.7 and SPP Mode
ƒ ECP Mode
ƒ ECP and EPP 1.9 Mode
ƒ ECP and EPP 1.7 Mode