IEI Integration IMBA-C2260-i2 User Manual
Page 125
IMBA-C2260-i2 ATX Motherboard
Page 108
Î
None D
EFAULT
No parity bit is sent with the data bits.
Î
Even
The parity bit is 0 if the number of ones in the data
bits is even.
Î
Odd
The parity bit is 0 if the number of ones in the data
bits is odd.
Î
Mark
The parity bit is always 1. This option does not
provide error detection.
Î
Space
The parity bit is always 0. This option does not
provide error detection.
Î Stop Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.
Î
1 D
EFAULT
Sets the number of stop bits at 1.
Î
2 Sets the number of stop bits at 2.
Î Flow Control [None]
Use the Flow Control option to report the flow control method for the console redirection
application.
Î
None D
EFAULT
No control flow.
Î
Hardware
RTS/CTS
Hardware is set as the console redirection.
Î VT-UTF8 Combo Key Support [Enabled]
Use the VT-UFT8 Combo Key Support option to enable additional keys that are not
provided by VT100 for the PC 101 keyboard.
The VT100 Terminal Definition is the standard convention used to configure and conduct
emergency management tasks with UNIX-based servers. VT100 does not support all keys