IEI Integration KINO-945GSE v1.07 - Manual (Page 76)

KINO-945GSE Motherboard
Page 60
PIN Signal Name Pin Signal Name Pin Signal Name
1 TMDS Data2- 9 TMDS Data1- 17 TMDS Data0-
2 TMDS Data2+ 10 TMDS Data1+ 18 TMDS Data0+
3 GND 11 GND 19 GND
4 N/C 12 NC 20 NC
5 N/C 13 NC 21 NC
6 DDC Clock [SCL] 14 PVDD1 22 GND
7 DDC Data [SDA] 15 GND 23 TMDS Clock +
8 Analog vertical sync 16 HPDET 24 TMDS Clock -
Table 4-20: DVI Connector Pinouts
4.3.4 LAN Connectors
CN Label: LAN/USB1 & LAN/USB2
CN Type: RJ-45
CN Location: See
7
Figure 4-18
CN Pinouts: See
7
Table 4-21
The KINO-945GSE is equipped with two built-in RJ-45 Ethernet controllers. The
controllers can connect to the LAN through two RJ-45 LAN connectors. There are two
LEDs on the connector indicating the status of LAN. The pin assignments are listed in the
following table:
PIN DESCRIPTION PIN DESCRIPTION
1 MDIA3- 5 MDIA1+
2 MDIA3+ 6 MDIA2+
3 MDIA2- 7 MDIA0-
4 MDIA1- 8 MDIA0+
Table 4-21: LAN Pinouts