IEI Integration ROCKY-3786 v4.10 - Manual (Page 93)

Page 93
MODEL NAME
ROCKY-3786EV CPU Card
Page 93
HDD-1
HDD-2
HDD-3
ZIP100
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
LAN
Disabled
Boot Other Device [Enabled]
Use the Boot Other Device option to determine whether the system uses a second or
third boot device if the first boot device is not found.
Disabled
The system does not look for second and third boot
devices if the first one is not found.
Enabled (Default) The system looks for second and third boot devices if the
first one is not found.
Swap Floppy Drive [Disabled]
Use the Swap Floppy Drive option to logically swap the mapping of drives A: and B:. It is
only useful when two floppy drives are installed.
Disabled (Default) The floppy drive mapping is set by the drive connector
arrangement.
Enabled
The floppy drive originally mapped to drive A: is
remapped to drive B: and vice versa.
Boot Up Floppy Seek [Enabled]
Use the Boot Up Floppy Seek option to enable the BIOS to determine if the floppy disk
drive installed has 40 or 80 tracks during the POST. 360K FDDs have 40 tracks while
760K, 1.2M and 1.44M FDDs all have 80 tracks.