6 power management setup, Ower, Anagement – IEI Integration ROCKY-3786 v4.10 User Manual
Page 106: Etup
Page 106
ROCKY-3786EV CPU Card
Page 106
port (ECP) mode. The ECP mode supports
bi-directional communication between the system and
the parallel port device and the transmission rates
between the two are much faster than the SPP mode.
ECP+EPP
The parallel port is compatible with both ECP and EPP
devices.
ECP Mode Use DMA [3]
Use the ECP Mode Use DMA option to specify the DMA channel the parallel port must
use in the ECP mode.
1
The parallel port uses DMA Channel 1 in ECP mode.
3
(Default)
The parallel port uses DMA Channel 3 in ECP mode.
PWRON After PWR-Fail [Off]
Use the PWRON After PWR-Fail option to specify the power status after the power is
reapplied.
Off
(Default)
The power is off after the power is reapplied.
On
The power is on after the power is reapplied.
Former-Sts
The power remains in its former status after the power
is reapplied.
5.6 Power Management Setup
Use the Power Management Setup menu (BIOS Menu 6) to set the BIOS power
management and saving features.