Warner Electric XCTRL-2DRV - Manual (Page 14)

14 Warner Electric • +33 (0) 2 41 21 24 24 P-2097-WE-A4
• Read/Write Partition
This section allows you to Modify, to Check and to Save to the control all sets of parameters. You will find on
the application a section named “Current partition” which represents the complete set of parameters (Cell/
Dancer parameters, PID, Splice, Input/output, Optional Inputs, …) of the partition selected by the number in
the box placed before.
- To read from XCTRL:
1) Select a number of partitions (P1P2P3).
2) Click on Read from XCtrl. The parameters of the XCTRL, saved into the internal memory, are then
loaded to the current partition, allowing you checking and modifying them.
- To write to XCTRL:
1) Select a number of partition (P1P2P3)
2) Click on Write to XCtrl. All parameter of the current partition are then loaded to the XCTRL memory.