Warner Electric 5300-101-001 Collector Ring - Manual

Installation Instructions
P-1371
819-0034
Collector Ring Mounting Instructions
for Ring 5300-101-001
0.56
(14.2)
0.69
(17.5)
4.0
(101.6)
2.94
(74.7)
B.C.
90°
120°
3.255 +0.00 / -0.002
(82.7 +0.00 / -0.05)
Customer's Hub
3.253 +0.002 / -0.000
(82.62 +0.05 / -0.00)
of W.E.B. & C. Co.
5300-749-001
16
Dia.
3.5
(0.14)
Dia. Hub
0.38
(9.7)
0.53
(13.5)
Min. Full Thds
Alternate
Mtg
Set Screw
Mtg
Contact Wire Holes
Locate this
between magnet
mounting screws C'Bore Hub
Min. Full Thds
Min. on Hub &
5300-101-001
Ring
CL
CL
40
3
40
2
40
1
4.242 (107.75)
4.226 (107.34)
Dia.
3.25
(82.6)
B.C.
1.125
(28.6)
0.31
(7.9)
0.56
(14.2)
Alternate mounting (with washers and screws)
On finished hub, drill and tap two holes for
#10-32 screws on 2-15/16 B.C. equally spaced
as shown.
Counterbore 21/32 diameter to depth shown.
Mount ring to hub and secure with 2 sems
(40/1).
Mounting (with set screws)
On rough hub, drill and tap three holes for #8-32
screw on 3-1/4 B.C. equally spaced as shown.
Machine hub as described under “General
Information”. Mount ring to hub and secure with
3 set screws (40/2). Lock screws in place with
prick punch.
General Information
Selection type of mounting desired – i.e.
Mounting (with set screws), or Alternate
Mounting (with washers and screws). Customer
shall machine hub to diameters called for and
axially to dimensions shown to create a
shoulder against which the collector ring shall
seat. This should to be used as a locator for all
drill, tap and counterbore operations. Mount
collector ring per selection mounting. Assemble
magnet lead wires thru holes in collector ring.
Secure screws (16/1) into wires and lock in place
with prick punch. Screw, when properly seated
into wire, shall be below surface of brass slip
ring. Cut off excess wire and coat exposed ends
with insulating varnish or sealing wax.
Ring number 5300-101-001 includes collector
ring and mounting screws. Failure to follow these
instructions may result in product damage,
equipment damage, and serious or fatal injury
to personnel.
Warner Electric 800-825-9050