Vanguard CT-8000 S3 - Manual (Page 98)

CT-8000 S3 USER’S MANUAL REV 1
93
3.4.6. Copying Test Records to a USB Flash Drive
You can easily copy test records stored in the CT-8000 S3's Flash EEPROM to a connected USB
Flash drive using the steps below:
a. Make sure a USB Flash drive is inserted in the unit's Flash drive port ("USB MEM" port).
Then start from the "START-UP" menu:
Press the [3] key (SAVE/RESTORE).
b. The following screen will be displayed:
Press the [5] key (COPY TO THUMB DRIVE).
c. The following screen will be displayed:
1. COPY SINGLE RECORD
Press the [1] key (COPY SINGLE RECORD) if you would like to copy a single record
from the CT-8000 S3 to the USB Flash drive. The following screen will be displayed:
ENTER RECORD NUMBER
to copy to flash drv
NUMBER:
copy rec to thumb drv
1. copy single RECORD
2. copy all records
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
5. COPY TO THUMB DRIVE
1. RUN TEST 10/09/13
2. GET RESULTS 10:10:10
3. SAVE/RESTORE
4. SETUP
5. DIAGNOSTICS