Vanguard CT-8000 S3 - Manual (Page 59)

REV 1 CT-8000 S3 USER’S MANUAL
54
g. The following screen will be displayed:
Hold down the [ARM] switch and press the [START] key.
h. The following screen will be displayed:
Continue to hold down the [ARM] switch until testing is finished. You will be returned
to the “START-UP” menu once testing is finished.
NOTES
• Please see section 3.3.5 for information about printing test results.
• The CT-8000 S3 can be configured to print tabulated and graphics reports
automatically after performing a test. Please see section 3.2.3 for further
information.
TEST IN PROGRESS
HOLD "ARM" UNTIL
TEST COMPLETES.
(UP TO 25 SECONDS)
HOLD "ARM" UNTIL
TEsT COMPLETES.
"START" TO BEGIN
"STOP" TO ABORT