Vanguard CT-8000 S3 - Manual (Page 82)

CT-8000 S3 USER’S MANUAL REV 1
77
NOTE
If you are printing the results of a dynamic resistance test and you had selected
option
[2] (PLOT FULL CHART), [3] (PLOT EXPANSION), or [4] (PLOT 0 - 200
MS), the following screen will be displayed:
The Dynamic Resistance graph can be printed with a 0 to 400 micro-ohm linear
scale, a 0 to 2000 micro-ohm linear scale, or a 10 to 2000 micro-ohm semi-log
scale. Select your preferred graph type by pressing the corresponding key on
the keypad. The test results will be printed and you will be returned to the
"START-UP" menu.
Figure 27. Typical Tabulated Test Results Printout for a CLOSE Operation
DYNAMIC RES PLOT
1. 0 - 400
μ
-ohms
2. 0 - 2000
μ
-ohms
3. 10 - 2000 semilog