Vanguard CT-8000 S3 - Manual (Page 68)

CT-8000 S3 USER’S MANUAL REV 1
63
d. The following screen will be displayed:
Press the
[START]
key.
e. The following screen will be displayed temporarily:
Then the following screen will be displayed:
The unit will wait for the external trigger.
f. Once an external trigger is sensed, the test results will be stored in the working memory
and you will be returned to the "START-UP" menu. Use the instructions in section 3.3.5
to print the test results. Sample on-line timing test results printouts are shown in Figure
21 and Figure 22.
AWAITING TRIGGER...
TESTING IN PROGRESS...
-> NO INITIATE CABLES
-> EXTERNAL TRIGGER
ONLY!
"START" TO BEGIN
"STOP" TO ABORT