Vanguard CT-8000 S3 - Manual (Page 28)

CT-8000 S3 USER’S MANUAL REV 1
23
d. The following screen will be displayed:
Type the station name using the keypad and then press the
[ENTER]
key.
e. The following screen will be displayed:
Type the circuit information using the keypad and then press the [ENTER] key.
f. The following screen will be displayed:
Type the circuit breaker manufacturer name using the keypad and then press the
[ENTER] key.
g. The following screen will be displayed:
Type the circuit breaker model information using the keypad and then press the
[ENTER] key.
MODEL:
_
↑↓
to position
"ENTER" TO ACCEPT
MANUFACTURER:
_
↑↓
to position
"ENTER" TO ACCEPT
CIRCUIT:
_
↑↓
to position
"ENTER" TO ACCEPT
STATION:
_
↑↓
to position
"ENTER" TO ACCEPT