Vanguard CT-8000 S3 - Manual (Page 90)

CT-8000 S3 USER’S MANUAL REV 1
85
3.4 Working with Test Records
3.4.1. Saving a Timing Record in Flash EEPROM
After performing a test, you can store the results in the CT-8000 S3’s Flash EEPROM. To save a
test record:
a. Start from the “START-UP” menu:
Press the [3] key (SAVE/RESTORE).
b. The following screen will be displayed:
Press the [1] key (SAVE SHOT).
c. The following screen will be displayed:
Press the [ENTER] key to save the test shot.
d. The following screen will be displayed:
Press any key to return to the “START-UP” menu.
SHOT SAVED
SAVE SHOT #1
TEST: LIVE OPEN
DATE: 09/17/13 10:29
"ENTER" TO PROCEED
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
1. RUN TEST 10/09/13
2. GET RESULTS 15:10:05
3. SAVE/RESTORE
4. SETUP
5. DIAGNOSTICS