Vanguard CT-8000 S3 - Manual (Page 97)

REV 1 CT-8000 S3 USER’S MANUAL
92
Type the record number that you would like to restore and press the [ENTER] key. If
you do not know the record number, you can print a test record directory using the
instructions in section 3.4.3.
e. The following screen will be displayed while the record is being restored:
The following screen will be displayed once the test record has been restored:
1. YES
Press the [1] key (YES) if you would like to print the restored test record. The
following screen will be displayed:
Please see section 3.3.5, step b, for an explanation of the above printing options.
2. NO
Press the [2] key (NO) if you do not want to print the restored test record. The test
record will be restored to the working memory and can be printed later if desired.
You will be returned to the "START-UP" menu.
1. PRINT TEST RESULTS
2. PLOT FULL CHART
3. PLOT EXPANSION
4. PLOT 0 - 200MS
REC_000 RESTORED!
PRINT RECORD?
1.
YES
2. NO
RESTORING RECORD...