Vanguard CT-8000 S3 - Manual (Page 30)

CT-8000 S3 USER’S MANUAL REV 1
25
3.2.2. Setting the Clock
Follow the steps below to set the CT-8000 S3’s internal clock:
a. Start from the “START-UP” menu:
Press the
[4]
key (SETUP).
b. The following screen will be displayed:
Press the [5] key (NEXT PAGE).
c. The following screen will be displayed:
Press the
[1]
key (SET DATE & TIME).
d. The following screen will be displayed:
Enter the month, date, time, hours, minutes, and seconds (in 24-hour format) using the
alpha-numeric keypad. When the last digit is entered, the clock will be set and you will
be returned to the “START-UP” menu.
ENTER
mm-dd-yy hh:mm:ss
_
1. SET DATE & TIME
2. SET PRINT MODE
3. SET 50/60 HZ
4. SET LANGUAGE
5. BLUETOOTH DEV RESET
6. PREVIOUS PAGE
1. ANALYSIS POINTS
2. MEASUREMENT UNITS
3. SHOT DESCRIPTION
4. NUMBER OF CHANNELS
5. NEXT PAGE
1. RUN TEST 10/07/13
2. GET RESULTS 10:15:25
3. SAVE/RESTORE
4. SETUP
5. DIAGNOSTICS