Teledyne LeCroy Inspector - Users Manual - Manual (Page 50)

CATC CATC Inspector User’s Manual Version 2.31
46
If the decoded standard request is GET_STATUS), a button called “Show Status” appears in the
USB Device Request Data dialog box; selecting this button brings up a form similar to the
following, displaying the status information returned by the device, decoded according to USB
Specification 1.0:
The form displays the recipient of the request (device, interface, or endpoint) as part of its title.
For interface and endpoint recipients, it also displays the corresponding number. The scrollbar at
the right side of the form permits viewing of all the entries. If the device only sends a portion of
the data, the Inspector software marks missing entries with “N/A”.