Teledyne LeCroy Inspector - Users Manual - Manual (Page 35)

CATC CATC Inspector User’s Manual Version 2.31
31
4.4.2.9 Save As Default (Display Options)
The “Save As Default” function is equivalent to the “Save...” function, specifying the file name
“default.opt”. Whenever the CATC Inspector software begins execution, it automatically loads
the “default.opt” file, if one exists.
4.4.2.10 Display Configuration Name
This field is used to enter a text string (30 characters maximum) to be associated with the current
set of Display Options. This name will be saved with the option set, and appear as part of the title
of the view window that is created using this set of options.
4.5 The Record Menu
The Record menu has two items (“Start” and “Stop”, described below), used to activate
recording activity. When the record function is active, the current recording status is displayed in
the status bar.
4.5.1 Start
Selecting the Start function instructs the CATC Inspector analyzer to begin recording USB traffic
data, as specified by the Recording Options.
4.5.2 Stop
Selecting the Stop function instructs the analyzer to stop the data recording process. This feature
is primarily of use when recording low-speed traffic, or not recording Idle states, which could
take a long time to fill the recording buffer.