Teledyne LeCroy Inspector - Users Manual - Manual (Page 14)

CATC CATC Inspector User’s Manual Version 2.31
10
•
view-only version (the “CATC USB Trace Viewer”) for Windows 3.1, Windows 95, and
Windows NT (This version does not require the Inspector USB hardware; it is used only for
viewing and analyzing previously created USB traffic files. It also serves as a product
demonstration vehicle.)
The software diskette label identifies the program version. To install the CATC Inspector
software, run the installation program from the Inspector software diskette, and follow the
instructions on the screen.
•
For the standard version on Windows NT systems, run the ‘setup.exe’ installation program.
Note that correct installation requires logging in as administrator.
•
For all other versions/systems, run the ‘install.exe’ installation program.
The installation program creates a program group for the Inspector application once it has
finished copying all the files. The icon for an Uninstall program is also placed in the program
group. This Uninstall program can be run later, if desired, to remove the CATC Inspector
software from the system.
To run the software, double-click on the Inspector icon in the program group created during
installation. Section 4 describes the software in detail.
3.1.1 Standard Version (Win 3.1 & Win 95)
The installation program copies the following files to the PC’s hard drive.
To the \USBINSPR directory (or that otherwise specified by the user):
•
USBINSPR.EXE executable code of the CATC Inspector program
•
USBINSPR.DLL DLL for the CATC Inspector program
•
CLS_HID.DLL DLL for HID Class device decoding
•
USBINSPR.HLP CATC Inspector help file
•
DEFAULT.OPT default DISPLAY function settings
•
DEMO.USB sample USB traffic file
to the \WINDOWS\SYSTEM directory:
•
USBINSPR.386 Windows CATC Inspector virtual device driver
•
CTL3D.DLL Windows 3D Control Library
•
CTL3DV2.DLL Windows 3D Control Library
to the \WINDOWS directory:
•
CLSDECOD.INI USB Device Class decoding initialization
In the \WINDOWS\SYSTEM.INI file, the installation program adds a reference to the CATC
Inspector driver in the [386Enh] section.
device=usbinspr.386