Teledyne LeCroy WaveJet 300A Series Getting Started Guide - Manual (Page 60)

Getting Started Manual
WJ-A-GS-E Rev A
59
Saving and Recalling Waveforms
Reference waveforms can be saved in internal memory (five locations) or in USB
memory (limited by memory capacity of USB device). When you save a waveform, the
setup is saved also.
You can display up to five reference waveforms at the same time. Press REF to turn
them all off together.
The “Reference Waveform” menu is accessed by pressing the
R EF front panel button.
Select from five memory locations (REF 1 to REF 5). To
scroll through the choices, you can use the A
DJUST knob or
press the Ref. No. button repeatedly.
Select On to display the reference waveform. All reference
waveforms appear white.
When saving a reference waveform, select the source.
When Recall REF Setup is selected, the setup stored in
the memory location selected above (REF 1 to REF 5) will
be recalled. This does not include setups saved in USB
memory, which are recalled through S
AVE /R ECALL .
When Save is selected, the source will be saved into the
memory location selected above (REF 1 to REF 5).