Teledyne LeCroy WaveJet 300A Series Getting Started Guide - Manual (Page 59)

WaveJet 300A Series
58
WJ-A-GS-E Rev A
SAVE AND RECALL
Saving and Recalling Scope Settings
You can save scope settings to internal memory or USB memory.
The “Save/Recall”
menu is accessed by pressing the S AVE /R ECALL front panel button.
Five memory locations available. Setup files named with
current time and date.
Files are identified by time and date saved.
The Save function saves not only setup files but also
waveforms in various file formats: Binary, ASCII, Mathcad.
You can also save reference waveforms to USB memory.
Delete lets you erase all setup, waveform, and screen
image files from USB memory.
Recalls setups and waveform files from USB memory.
The default setup turns on all channels and sets the
following conditions with channel 1 as the trigger source:
Timebase = 200 ns/div Gain = 100 mV/div
Trigger mode = Auto Coupling = DC1Mohms