Teledyne LeCroy WaveJet 300A Series Getting Started Guide - Manual (Page 30)

Getting Started Manual
WJ-A-GS-E Rev A
29
Trigger Controls L
EVEL -- Selects the trigger threshold level.
Press the L EVEL knob to have the scope find
the trigger level automatically.
S
ETUP -- Displays the trigger setup menu.
A
UTO
--
Triggers the scope after a time-out,
even if the trigger conditions are not met.
N
ORMAL
-- Triggers the scope each time a
signal is present that meets the conditions set
for the type of trigger selected.
S
INGLE
/S
TOP
-- Arms the scope to trigger
once (single-shot acquisition) when the input
signal meets the trigger conditions set for the
type of trigger selected. If the scope is already
armed, it will force a trigger.
Horizontal Controls D
ELAY
-- Horizontally positions the scope
trace on the display so you can observe the
signal prior to the trigger time. Press the
button to reset the delay to zero.
T
IME
/D
IVISION -- Sets the time/division of the
scope timebase (acquisition system).
S ETUP -- Displays the main horizontal setup
menu.