Teledyne LeCroy WaveJet 300A Series Getting Started Guide - Manual (Page 26)

Getting Started Manual
WJ-A-GS-E Rev A
25
POWER-UP AND INSTALLATION
Power-Up
Press the power switch at bottom-left of the front of the scope to apply or
remove power.
Software
You can find out the scope's software and hardware configuration as follows:
1. Press the front panel U TILITIES button.
2. From page 2/3 of the “Utilities” menu, select
Status & Update, then Status.
3. A pop-up box opens:
4. Press C LOSE to close the pop-up box.