Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 220)

LabMaster 9 Zi-A
212 922157-00 Rev A
4. Touch the icon for the layout Orientation you want: portrait or
landscape.
5. Touch the Hardcopy Area control to choose which part of the screen
you want to print from the pop-up menu.
Choose Grid Area Only if you do not need to print the dialog area
and you only want to show the waveforms and grids. Choose DSO
window if you want to print the dialogs with the waveforms and
grids. Choose Full Screen if you want to print the entire screen.
Adding Printers and Drivers
NOTE: If you want to add a printer driver, the driver must first be loaded on the
oscilloscope.
1. Touch File → Print Setup... on the menu bar.
OR
Press the P
RINT
front panel button. Then, touch the Print Setup...
button on the Print flyout menu.
OR
Touch Utilities → Utilities Setup... and click the Hardcopy tab.
2. On the Utilities Hardcopy dialog, touch the Printer icon.
3. Touch the Add Printer button. A Microsoft Windows® Printer
window opens where you can add a printer.