KB Electronics KBMK-24DF User Manual

Page 29

11 STATUS LEDs

The drive's cover contains 8 LEDs which provide indication of the drive’s status and operating mode (Hz,
PGM, LCL/REM, STOP, FWD, REV, OL, JOG/REM). See Table 8, for a description of the LEDs.

WARNING! Wait at least 1 minute before opening the cover. Be sure the main power switch or

circuit breaker is in the "OFF" position before servicing the drive. Do not depend on the Status LEDs
or the 4-Digit Display to no longer be illuminated as a guaranteed power off condition.

TABLE 8

LED DESCRIPTIONS

LED Description

Illuminates when Jog is selected. Flashes when the drive is set for Remote Signal Operation.

Illuminates when the drive is in Overload.

Illuminates when the drive is in the Forward Direction.

Illuminates when the drive is in the Reverse Direction.

Illuminates when the drive is in the Stop Mode.

Illuminates when the display is set to show Output Frequency.

Illuminates when the JOG-LCL/REM Key is reprogrammed for Local (Keypad) and Remote Signal
Operation.

Illuminates when the drive is in the Program Mode.

This manual is related to the following products:

KBMK-24D