KB Electronics KBAC-29 (1P) - Manual

MODEL KBAC-29 (1P) SUPPLEMENT
IMPORTANT: The KBAC Series Installation and Operation Manual (Part No. A40206) must be read
and understood before attempting to operate this drive. For further assistance, contact our sales
Department at 954-346-4900 or Toll Free at 800-221-6570 (outside Florida).
DESCRIPTION: Model KBAC-29 (1P) has been added to the KBDA Series of drives. This model is
designed to accept single-phase 208/230 Volts AC line input only. Table 3A, Table 4A, and Figure
8A, below, are additions to Table 3 (on page 10), Table 4 (on page 10), and Figure 8 (on page 14),
respectively, of the manual.
WARNING! HIGH VOLTAGE!
DISCONNECT MAIN POWER BEFORE MAKING CONNECTIONS TO THE DRIVE
TABLE 3A – GENERAL PERFORMANCE SPECIFICATIONS
Description Specification Factory Setting
Operating Temperature Range (°C / °F) 0 – 35 / 32 – 95 ──
Operating Humidity Range (% Relative, Non-Condensing) 0 – 95 ──
Storage Temperature Range (°C / °F) -25 – +85 / -13 – +185 ──
TABLE 4A – ELECTRICAL RATINGS
AC Line Input Output
Model
Part No.
(Gray / White 1 )
Volts AC
(50/60 Hz)
Phase
(Ф)
Maximum
Current
(Amps AC)
Fuse or
Circuit
Breaker
Rating
(Amps)
Voltage
Range
(Volts AC)
Maximum
Continuous
Load Current 2
(RMS Amps/Phase)
Maximum
Horsepower
(HP (kW))
KBAC-29
(1P)
10001 / 10002 208/230 1 20.5 25 0 – 208/230 9.0 3 (2.25)
Notes: 1. White FDA approved finish. 2. The drive is rated 9.0 Amps at 35 °C, maximum, and
derated to 8.3 Amps at 40 °C. For ambient temperatures above 40 °C, the drive is derated 2.5%
per °C.
FIGURE 8A – A LINE INPUT, MOTOR, AND GROUND CONNECTIONS
KB Electronics, Inc.
12095 NW 39th Street, Coral Springs, FL 33065-2516 ● (954) 346-4900 ● FAX (954) 346-3377
Outside Florida Call Toll Free (800) 221-6570 ● [email protected]
www.kbelectronics.com (A42047) – Rev. A00 – 3/22/2010