IAI America RCP2CR-SS8C - Manual (Page 93)

85
9. Maintenance and Inspection
9) Connect the encoder connector. 10) Connect the motor connector.
11) Pull out the motor-end cap from the motor cover and affix it with the pan-head screws (M3 ×
105, 4 pcs.). At this time, make sure not to pinch the cables.
Tightening torque: 61.5 N·cm (6.3 kgf·cm)
12) Affix the motor cover.
‡,IWKHSRVLWLRQLQJSLQGRHVQRWJRLQVPRRWKO\
JHQWO\WDSWKHPRWRUHQGFDSXVLQJDSODVWLF
hammer to push in the pin.
‡7LJKWHQWKHSDQKHDGVFUHZV0[SFV
Tightening torque: 61.5 N·cm (6.3 kgf·cm)
&DXWLRQ 'RQRWDSSO\DIRUFHWRWKHHQFRGHU
E\WRXFKLQJLWGLUHFWO\