IAI America RCP2CR-SS8C - Manual (Page 70)

62
9. Maintenance and Inspection
Tightening torque: 83 N·cm (8.47 kgf·cm) Tightening torque: 87.2 N·cm (8.90 kgf·cm)
9) Install the pulley assembly.
䈄 Align the angles of projections and depressions on
the couplings.
‡7LJKWHQWKHKH[DJRQVRFNHWKHDGVFUHZV
0îSFVXVLQJDQ$OOHQZUHQFKRI
2.5 mm across flats.
Align the angles of projections and depressions.
10) Loop the belt over the pulleys.
11) Pass a looped strong string (or lo QJWLHEDQGDURXQGWKHPRWRUHQGIODQJHDQGSXOOLWZLWKDWHQVLRQJDXJHWR
the specified tension. In this condition, uniformly tight HQWKHDGMXVWLQJEROWVKH[DJRQVRFNHWKHDGEROWV0î
10, 4 pcs.).
8VHDQ$OOHQZUHQFKRIPPDFURVVIODWV
Tightening torque: 83 N·cm (8.47 kgf·cm)
Tension: 2.5 kgf
Adjusting bolt tightening torque:
162 N·cm (16.5 kgf·cm)
12) Install the motor cover.
7LJKWHQWKHKH[DJRQVRFNHWKHDGVFUHZV
0îSFVXVLQJDQ$OOHQZUHQFKRI
2.5 mm across flats.
13) Install the pulley cover.
7LJKWHQWKHWKLQKHDGVFUHZV0î
SFVXVLQJDQ$OOHQZUHQFKRIPP
across flats.