SecurityMan LCDDVR4 - Manual (Page 77)

71
2) I cannot playback the VVF files on my computer?
If PC playback fails do the following:
A) Plug the USB drive into another available USB port on the computer.
Ensure the USB is one of the built-in ports on the computer. Check if
the flash drive or thumb drive mount on the computer.
B) Re-install the player software from the CD.
3) I cannot load system default?
Boot up the DVR and then press the QUAD button on the front of the DVR 20
times will reset LCDDVR4 to manufacturer's default setting. Please be sure
to jot down any information before resetting the DVR, ie IP address, Subnet,
Gateway, etc.
4) When motion and sensor time schedule is active; will manual recording contin
ues to operate?
Yes, manual recording will continue to operate even when motion and sensor
schedule is set or activated.
5) How large of a hard drive can i use with LCDDVR4 unit?
LCDDVR4 should support hard drive capacity into the terabyte; a 2.5TB drive
capacity has been tested to have worked and performed well.
6) Does the PC playback software (Vx4SLPlayer) work with Windows Vista 64-bit
or Windows 7 64-bit operation system?
No, the Vx4SLPlayer is currently not supporting 64-bit operation system.
However the playback software is fully compatible with Windows 2000, XP,
Vista and 7 operation system running 32-bit.