SecurityMan LCDDVR4 User Manual

Page 56

BACKUP to USB Memory Stick

To backup to memory stick or thumb drive, in playback mode:
1. Use search query (Search:Playback above) to playback the file for backup.
2. Plug in a memory stick or thumb drive (fat 32 file formatted) into the USB port
located on the right side of the LCDDVR4.
3. Press the

Menu/ESC button on the front panel, RC or right mouse click

anywhere on the playback screen to bring up the playback control window (as

illustrated above) to select the BACKUP button and then a BACKUP window will

appear as shown below.

4. Next, hover (UP/DOWN button on front panel, RC or simply put the mouse

cursor over) the cursor over the

End Time and then press SEL/EDIT button on

the front panel, RC or simply left mouse click on the End Time to increase the

time to backup. Notice the

Size field will increase each time the End Time field

is selected or clicked on.
5. Next, hover down to

USB Copy field and press SEL/EDIT button or left mouse

click on

USB Copy to continue the backup process.

6. It will take a few seconds to calculate and read the USB memory stick and

then a

Backup to USB window will appear as illustrated below.

Review the

Start Time, End Time, Copy Size, and File Name (system gener-

ated and in VVF format) to be corrected (as shown above), then press or click

IMPORTANT: After searching for an event to backup; DO NOT press the ▌▌

pause button, press the

Menu/ESC button on front panel, RC or click on the

BACKUP button (step 3 above) so that the

End Time in the picture above

still ticking forward. The difference between the

Start Time and the End

Time is the total time to backup.