SecurityMan LCDDVR4 - Manual (Page 16)

10
Rear Panel
The rear panel of the LCDDVR4 consists of ports and interfaces for video inputs,
video output, audio inputs, audio output, power socket, mouse port, HDD bracket,
I/O terminals and bracket stand. The picture below shows a list of basic ports,
I/O interfaces and connections:
1) DC 12V: An AC/DC power socket for power adapter input. Connect using
the power adapter provided; plug the power jack to the DC 12V socket and
then plug the power adapter to an electrical outlet. Power adapter specifica
tion: Input: AC 100~240V, 50/60Hz, 1.5A / Output: DC +12V == 5.0A, positive
inside.
2) AUDIO OUT (1x): RCA interface connection to an audio input speaker (mono)
source. Use to transfer both live and playback audio output from the DVR to
a larger speaker.
3) POWER: This is the main power switch for the DVR, to switch ON/OFF.
4) VIDEO OUT: For monitor output to a TV monitor, CCTV monitor and etc.
Video output is BNC connector interface use ideally to output the display into
a larger monitor display or if the LCD display gone bad. The VIDEO OUTPUT
works in parallel with the built-in LCD monitor, however the LCD menu will not
display through to the video output. It can also be connected into a VHS
device for tape backup.