SecurityMan LCDDVR4 - Manual (Page 30)

24
Using Front Panel and Remote Control
Press the
Menu/ESC button on the front panel or remote control to access the
Setup menu list. Press the UP and DOWN button on the front panel or remote
control to browse up and down the Setup menu. Press SEL/EDIT button on
the front panel or remote control select and enter the sub-menu. To change the
parameter or values of the sub-menu simply select the sub-menu, the “ ” red
icon will be shown on the right side of the screen and then press on the Select/
Enter button to change. To escape and go back to the previous menu, press
Menu/ESC button on the front panel or remote control. For detail diagram of
the front panel and remote control button description, go to page 7 and 12 of the
manual respectively. Front panel and remote controls is common and can be use
throughout the Setup menu.
Using Mouse Control
Move the mouse up and down to browse through the
Setup menu list. Press the
left button on the mouse to select highlighted menu/sub-menu. In the sub-menu,
click on the “ “ red icon shown on the right side of the screen to change the
parameter or values of the sub-menu. Use the right mouse click at anytime to
escape to the previous Setup menu. To connect the PS/2 mouse to the DVR,
please reference page 19 of the manual. Mouse control is common and can be
use throughout the Setup menu.
CAMERA
Select Camera from the Setup menu to get the camera setup menu as show
below.