Ronan X501NET - Manual (Page 54)

Chapter 5 –Troubleshooting Configuration Problems
X501NET System Configuration Manual – © 2008 Ronan Engineering Company 48
4.6 Adding/Removing Multiplexer Cards
Login (see section 4.1) as an administrator. Click on Input Cards link on the Main Menu page. This
takes you to the Input Cards page. Click the check box on the line for the correct input card in the
Enabled column to toggle between enabling and disabling the card.
4.7 Adding/Removing Users
Login (see section 4.1) as an administrator. Click on Users link on the Main Menu page. This takes
you to the Users page. Make any changes required and click the
Save button.
Note that it is essential that there always be at least one user that has administrator rights on the
list of users. If you remove the all administrators or lose the user name/password combination
for the administrator(s) you will not be able to correct the problem and the X501NET controller
boards will need be returned to Ronan to be re-programmed to factory defaults.