Ronan X501NET - Manual (Page 50)

Chapter 2 - Interface
X501NET System Configuration Manual © 2008 Ronan Engineering Company 44
2.14.1 Configuration File Page Buttons
Button Action
Pressing the
Logout button logs out the current user. After
pressing the
Logout button it is necessary for a user to login
before any other menu pages can be accessed.
Pressing the
Main Menu button takes the user to the Main
Menu page.
Pressing the
Reset Device button cause the X501NET to
do a hardware reset (if the user has sufficient access rights –
see section 2.12.3) or takes the user to the appropriate results
page (see section 2.1.2) if the user does not have sufficient
access rights.
Pressing the
Restore original values button restores
the last saved values for all parameters on the page. Note: it
does NOT restore the values to original factory settings.
Pressing the
Save button causes the changes made by the
user on the page to be saved (if the user has sufficient access
rights – see section 2.12.3) and then takes the user to the
appropriate results page (see section 2.1.2).
2.14.2 Configuration File Content
Anytime the X501NET configuration file (see appendix A for and example) is be modified
through the web interface, the X501NET will update its configuration parameters accordingly
and will generate appropriate events. These events will then be sent to the Event Server.
Depending on the parameter type, the new values may take effect immediately or may require
the X501NET to be rebooted before they take effect.