Ronan X501NET - Manual (Page 52)

Chapter 3 –Initial Configuration
X501NET System Configuration Manual – © 2008 Ronan Engineering Company 46
password(s) is lost, the X501NET controller boards must be returned to Ronan to be re-
programmed to factory defaults.
3.4 General Configuration
The data on the General Configuration page is totally system dependent. Refer to your system
documentation to configure to values on this page.
3.5 Card and Point Configuration
The card and point configuration is typically downloaded to the X501NET by the master station.
3.6 IEC 60870 Configuration
Most systems do not require and IEC 60870 configuration. The only exceptions are systems that use a
public network as part of their network configuration. These systems should configure the IEC 60870
Servers field on the IEC 60870-5-104 Configuration page to only accept connection from
the master stations that are part of your SER.
3.7 X110 Configuration
If the SER system includes X110 Window Annunciators, please refer the SER system documentation
for the specific configuration information.