Ronan X501NET - Manual (Page 29)

Chapter 2 - Interface
X501NET System Configuration Manual © 2008 Ronan Engineering Company 23
Button Action
Pressing the
Main Menu button takes the user to the Main
Menu page.
Pressing the
Refresh button reloads the page with the
current status of all cards.
Pressing the
Save button causes the changes made by the
user on the page to be saved (if the user has sufficient access
rights – see section 2.12.3) and then takes the user to the
appropriate results page (see section 2.1.2).
2.7.2 Card Configuration
The X501NET configuration displays input card type and status and input cards operation to be
controlled.
2.7.2.1 Global Test Interval Field
In most cases it is preferred to use the same test interval for all cards. If the Global Test
Interval to a number different than 0 all input cards (capable of running an input test) are tested
at that interval
22
.
2.7.2.2 Card Field
The Card field is read-only. It identifies the card slot (1 through 16) associated with the row of
fields.
2.7.2.3 Enabled Field
If the card is present but not required to report data, it can be disabled by clearing the check in
the Enabled column.
2.7.2.4 Model Field
The Model field is read-only. It contains the model name (e.g. X501-312) of the card in the slot
(1 through 16) associated with the row.
2.7.2.5 Status Field
The Status field is read-only. It contains the status of the card in the slot (1 through 16)
associated with the row:
Status Enabled Card in Slot
Normal checked yes
Not Configured and Present not checked yes
22 Individual Interval settings are ignored.