Ronan X501NET - Manual (Page 20)

Chapter 2 - Interface
X501NET System Configuration Manual © 2008 Ronan Engineering Company 14
Button Action
thru
Pressing a button with a number in it takes the user to the
Point
Configuration page (see section 2.7.2) for that
number point (if the user has sufficient access rights – see
section 2.12.3).
2.4.2 Point List
The point list is a table where each line contains information about a point. The information in
the table is current when the page is generated but it is NOT automatically updated while the
page is viewed. Pressing the Refresh button will cause the page to be regenerated to provide a
new snapshot of point status.
2.4.2.1 Point
The Point column of the point list contains a button with the number of the point (
0 to 127).
Pressing this button takes the user to the Point Configuration page (see section 2.7.2) for
that number point (if the user has sufficient access rights – see section 2.12.3).
2.4.2.2 LogAddr
The LogAddr column of the point list contains the Logical Address of the point as defined in
the Point Configuration page for that point.
2.4.2.3 Tag
The Tag column of the point list contains the Tag of the point as defined in the Point
Configuration
page for that point.
2.4.2.4 State Legend
The State Legend column of the point list contains the legend (defined in the Point
Configuration
page for that point) that corresponds to the current state of the point.
2.4.2.5 Polarity
The Polarity column of the point list contains the Polarity of the point as defined in the Point
Configuration
page for that point.
2.5 Event History Page
The Event History page displays a window into the most recent events (up to 8000) that are
present in the X501NET’s event buffer.