Ronan X501NET - Manual (Page 16)

Chapter 2 - Interface
X501NET System Configuration Manual © 2008 Ronan Engineering Company 10
2.2.3 Configuration
The Configuration portion of the Main Menu page contains links that are used to view or
change configuration information. These links can only be accessed by users that have
Administrator or Operator access rights.
2.2.3.1 General Configuration Link
Clicking the General Configuration Link takes the user to the General Configuration
page (see section 2.6). This page shows the device’s physical and logical addresses, and time
subsystem parameters. This page also allows these parameters to be changed if the user has
Administrator access rights.
2.2.3.2 Input Cards Link
Clicking the Input Cards Link takes the user to the Input Cards page (see section 2.7). This
page displays the status of all input cards and can be used by an Administrator to enable/disable
and configure input cards.
2.2.3.3 Points Configuration Link
Clicking the Points Configuration Link takes the user to the Points Configuration
page (see section 2.8). The Points Configuration page provides a means to view and/or
configure the parameters of each input point of the X501NET, as well as a means to navigate
through the points.
2.2.3.4 Network Link
Clicking the Network Link takes the user to the Network page (see section 2.9). The
Network
page provides a means to view and configure the parameters of the TCP/IP protocol
used by the X501NET.
2.2.3.5 IEC 60870-5-104 Link
Clicking the IEC 60870-5-104 Link takes the user to the IEC 60870-5-104 page (see
section 2.10). The IEC 60870-5-104 page allows the user to view/modify the parameters of
the IEC 60870-104-5 Protocol. This Protocol is used for communication between the X501NET
and IEC60870 master stations.
2.2.3.6 X110 Connection Configuration Link
Clicking the X110 Connection Configuration Link takes the user to the X110
Connection
Configuration page (see section 2.11). The X110 Connection
Configuration page is used to setup the Ethernet communication with up to four X110
annunciators.