Teledyne 9060 - Zirconium oxide flue gas oxygen analyzer - Manual (Page 98)

9060-Zirconia Analyser
Removed “it is acknowledged that” from disclaimer. Changed telephone and fax numbers to international
format. (TAB)
19/12/00 October 2000 version
Fixed errors relating to the set-up menu item numbers. (TAB)
20/12/00 October 2000 version
Added BB RAM Fail to the list of common alarms in section 3.10, Connecting the Alarms
06/02/01 October 2000 version
Corrected alarm description numbering in section 4.3.2 – TAB
09/02/01 October 2000 version
Corrected alarm description “heater bypass” to “burner bypass” – TAB
10/05/01 Corrected more typo’s. – TAB
9/10/01 November 2001 version
Changed the EPROM version number to 2.16.
Added a note to Setup 63, freeze time set to zero, not freeze of outputs.
Added extended menus to section 5.1
Removed the note about heaters failing if left in setup for more that 2 minutes.
Added section 2.9 MANUAL CALIBRATION CHECKING - PROBES
Moved all references to section 2.9 to 2.14
Added extended set-up items 89-91, Low oxygen cal and 4-20mA limit yes/no
Added average to channel 2 in section 1 setup specifications and 5.5.28 and 5.5.30.
Added the SSR Fail alarm to 4.3.1.
Added comments liking to set-up 91 in the output channel setups.
4/11/01 November 2001 version
Changed the note comments for print log on page 55/56.
20/02/02 February 2002 version
Colourised manual
5/04/02 Colour MK1 version
Replaced photograph with word drawing in section 5.4
9/04/02 Colour MK1 version
Added MODBUS™ to the contents list on p1.
26/06/02 Colour MK1 version
Font size of the LCD display in chapter 5 changed.
19/07/02 Colour MK1 version
Made odd and even footers the same colour, made set-up menu consistent, added ™ to modbus. (TAB)
04/09/02 Colour MK1 version
Changed page 1 – updated copyright information, added website details (JPM)
14/10/02 Colour MK1 version
Added MODBUS comment to specifications and description
5/6/03 June 2003 version
Updated the drawing in Section 5.3 to mirror the new labels