Teledyne 9060 - Zirconium oxide flue gas oxygen analyzer - Manual (Page 14)

9060-Zirconia Analyser
OXYGEN PROBE SPECIFICATIONS
M ODEL 1231 1232
Application Combustion flue Combustion flue gases
gases below above 700°C (1290°F) with
900°C (1650°F) no contaminants.
Refer to note 1 eg. natural gas, light oils
Temp. Range 0 to 900°C. Refer to note 2 700 to 1400°C
(32 to 1650°F) (1470 to 2550°F)
Length 250 to 2000 mm 500 to 1500 mm
(10” to 80”) (20” to 60”)
Process 1 ½" BSP ¾" BSP
Connection or NPT or NPT
Electrical Weatherproof plug-in connector or optional screw terminals. The
Connection plug connector can be supplied with the cable.
Cable Order a specific length with the transmitter
Heater Yes No
Thermocouple K, integral R, integral
Response Time Typically < 4 secs. Typically < 1 sec
Head Temperature -25 to 100°C (-15 to 210°F) with weatherproof connector
-25 to 150°C (-15 to 300°F) with screw terminals
Reference Gas Ambient air 50 to 150 cc/min (3 to 9 scim). Pump can be supplied
with transmitter
Ref Air Connection 1/4" NPT Integral air line in probe cable. Barbed
fitting to 3/16" ID PVC tube.
Filter Removable sintered titanium alloy particulate filter,
30 micron standard, optional 15 micron available. Refer to note 2
CAL Check Gas 1/8" NPT female 1/8" NPT female
Connection
Weight 2 kg (4.4 lb) plus 1 kg (2.2 lb) plus
165 g (5.8 oz) / 100 mm 100 g (3.5 oz) / 100 mm
(4”) length (4”) length