Teledyne 9060 - Zirconium oxide flue gas oxygen analyzer - Manual (Page 81)

9060-Zirconia Analyser
81
81
APPENDIX 1
CONSTITUENT VALUES FOR FUELS
If the transmitter is set up to have readout or output of combustibles or maximum carbon
dioxide, then the fuel constituents must be entered. Any or all of the variables can be
modified and entered in set-up steps 39 to 45 and 46 to 51. (Refer to Section 5.5). Your
fuel supplier or chemist should be able to give you all these values.
A is the heat of combustion of the fuel per gram atom of contained
carbon.
H is the H/C atom ratio in the fuel.
O is the O/C atom ratio in the fuel.
N is the N/C atom ratio in the fuel.
S is the S/C atom ratio in the fuel.
M is the ratio of H2O molecules to C atoms in the fuel