Teledyne 9060 - Zirconium oxide flue gas oxygen analyzer - Manual (Page 8)

9060-Zirconia Analyser
Range of Indication, Upper Line
• Auto ranging from 10-30 to 100% 02
Indication Choice, Lower Line
Any or all of the following can be selected for lower line display:
• Date - time
• Run Hours since last service
• Date of last service
• Probe 1 oxygen
• Probe 2 oxygen
• Probe 1 EMF
• Probe 2 EMF
• Probe 1 Temperature
• Auxiliary Temperature
• Probe 2 Temperature
• Probe 1 Impedance
• Probe 2 Impedance
• Ambient Temperature
• Ambient Relative Humidity
• Carbon Dioxide
• Combustibles
• Oxygen Deficiency
The oxygen deficiency output can be used in the same way as a combustibles transmitter
to signal the extent of reducing conditions of combustion processes.
Accuracy
• ±1% of actual measured oxygen value with a repeatability of ±0.5% of measured value.
Relay Contacts
• 0.5A 24 VAC, 1A 36 VDC
Environmental Rating
• Operating Temperature: -25 to 55°C (-15 to 130°F)
• Relative Humidity: 5 to 95% (non-condensing)
• Vibration: 10 to 150Hz (2g peak)
Power Requirements
• 240 or 110V, 50/60 Hz, 105 VA (heated probe)
• 240 or 110V, 50/60 Hz, 5 VA (unheated probe)