Teledyne 9060 - Zirconium oxide flue gas oxygen analyzer - Manual (Page 12)

9060-Zirconia Analyser
STANDARD PROBE ‘U’ LENGTHS
1231 1232
250 mm (10”) 500 mm (20”)
350 mm (14”) 750 mm (30”)
500 mm (20”) 1000 mm (40”)
750 mm (30”) 1500 mm (60”)
1000 mm (40”)
1500 mm (60”)
2000 mm (80”)
Ordering Information
1.
Probe insertion length (from process end of mounting thread to probe sensing tip).
2.
Mounting thread (process connection), BSP or NPT (for size of thread refer to
specifications).
3.
Lagging extension length, if required.
4.
If model 1232 probe, state preferred thermocouple type (refer to specifications).