Multichannel Systems Roboocyte2 Manual - Manual (Page 66)

Roboocyte2 Manual
62
Roboflow-System
Click the button "Valve Liquids" to open the "Composition of Compounds per Valve"
editor for the Roboflow showing the default, empty "EmptyTemplateConfiguration".
The editor assigns the 12 available valves to the respective compounds and concentrations used.
In addition you can select the buffer in which the compound is dissolved. Before assembling the
different solutions, define your buffer(s) and compound(s). To delete the complete configuration
or the configuration of the selected valve, please use the buttons "Clear Complete
Configuration" and "Clear Configuration of Selected Valve". Use "Exit" if the compositions
are okay.
Defining a Buffer
Click on the icon to open the buffer editor "Edit Buffer".
In the “Edit Buffer” dialog you have to define the buffer in the left half of the dialog. Specify
the "Buffer Name" and the "pH" value of the buffer and write a "Comment", if necessary.
By clicking on a buffer name in the first column you can define the compound composition of
the buffer and the concentration in the right half of the dialog. Generate new rows for additional
entries by clicking the “Add Raw” icon and delete rows with .