Multichannel Systems Roboocyte2 Manual - Manual (Page 33)

Setting Up Hardware and Software
29
Press the two autoscale arrows at the bottom of the data plot window .
This will bring the current traces completely on the display.
You can also zoom into a certain region by using the zoom box tool .
Complete zoom-out can be accomplished by pressing the zoom-out button .
The current traces displayed now have been recorded with a proportional gain of 1000 nA/mV
and an integral gain of 100 1/s at a sampling rate of 20 kHz. With the test model cell, this leads
to voltage-clamp within less than 1 ms. Similar values can be expected with a "tight" non-injected
oocyte.